Hp Proliant Dl380p G8 Firmware Update

How to Upgrade iLO4 on HPE DL380p Gen8 Servers Using iLO4 Webpage

HPE ProLiant Gen8 Servers - Updating Server Firmware from iLO4 Webpage

Once a firmware update is bachelor, from the HPE Business Support Center download pages, the side by side step is to install the update onto the system. HPE has many methods for updating firmware, making the process easy. For this article, we volition exist upgrading the iLO4 firmware on the HPE ProLiant DL380p Gen8 server using the iLO4 webpage.

1. Download the online Firmware update file and extract the .BIN file.
Go to HPE Commuter download folio of your Server, for this case, the server is HPE DL380p Gen8.

Download link is here: https://support.hpe.com/hpesc/public/km/product/5194969/Product?cc=united states&lang=en#t=DriversandSoftware&sort=relevancy&layout=tabular array

Extract the file to a location on your hard disk drive. (Retrieve the file location)

2. Open up the Net Explorer and Firefox browser. Enter the iLO IP address in your browser window and press Enter or Render key on the keyboard. Enter the iLO Username and Password and click Log in

3. Click on Assistants and Firmware. The iLO 4 Firmware page will appear.

four. Click theBrowse button and select the .BIN file you lot extracted in Step i above. Click Open

5. Click the Upload button to start the upgrade process.

6. A Alert most iLO firmware update process volition announced, ClickOK.

7. The iLO Firmware image file (.BIN file) will exist uploaded.

8. The Secure digital signature will be checked.

9. The iLO firmware will be flashed. Wait until it is consummate.

ten. The iLO4 firmware is at present updated and iLO will reset. Click OK on the alarm bulletin. Note: If the browser is not updated, you lot will need to clear the browser cache.